|
|
Post by elnoodle the reasonable on Oct 3, 2022 21:20:00 GMT
front had a bit of wear and there was a some play between the sprocket and the drive shaft spline. That's not usually a good sign. The only way there can be wear on the spline surfaces is if the front sprocket was loose surely? The retaining bolt was torqued right up but there was still some play. When I put the new sprocket on there was no play at all. I guess you're going to get some wear between 2 surfaces but I don't recall seeing this before. It was clearly needing replaced either way. |
|
